Maqephe a 1060 a aluminium

 

Leqephe la li-aluminium tse 1060 la alimunum ke boemo bo phahameng haholo { E sebelisoa hohle ho etsoa likarolo le lisebelisoa tse khabisitsoeng tse sa hlokeng matla a phahameng ka lebaka la ho hatella hantle, ho se khonehe. E loketse lisebelisoa tsa sehlopha sa booa, lisebelisoa tsa malapa, ho kenya le liindasteri le indasteri ea kaho. Ka lebaka la boima ba eona bo bobebe le ts'ebetso e bonolo, e fetohile boitsebiso bo ratoang bakeng sa lihlahisoa tse ngata tsa khanya tsa khanya.

 

 

Alloy	1060 laluiti tur
Bohale	O,H12,H14,H16,H18,H19,H22,H26,H28,H32,H36,H34,H38
Botenya (limilimithara)	0.2-8.0
Bophara (MM)	100-2650
Bolelele (limilimithara)	C
Tloaelo	Jis, Aisi, Asisi, GB, GB, DIN, en
Bokantle	Hooa, ho otla, ho hlatsoa, ​​ho panya, ho panya, honoo, hono.
OEm	Ho putlama, ho itšeha ka boholo bo khethehileng
Sampole	MAHALA
Package	Ho thellela, mokotla oa polasetiki, filimi, lehong le nang le lehong le nang le lehong le nang le lehong la kantle la naha
Kopo	Kaho, ho haha ​​ka sekepe, mokhabiso, indasteri, lihlahisoa, memone, hardware, hardware le masimo a mang

 

 

Matla a tšepe (MPA)	Tlhahlobo ea Tlhahlobo 0.2% (MPA)	Seteya sa Nakona (%)
110-136	E kholo ho feta kapa e lekanang le 75	3-5

 

 

I. LITLHAKISO TSA BOPHELO

Thupelo ea aluminium e 1060 ea aluminium e hloekileng e nang le li-aluminium tse ntle tsa ho fihla ho 99.6%, ho letoto la 1000. Bophahamo ba eona ke 2.68-2.71 g / cm.71 g / cm³, matla a eona a lehlaka ke 110-136 m

Bo hloekileng bo hloekile haholo:

Lightweight: Its weight is only one-third that of steel, making it suitable for lightweight designs.

Melemo ea bokaholimo: Filimi ea aluminium oximoum ea tlhaho e thehiloe e sa feleng, e neng e atile le lijalo tse tloaelehileng le lijalo tsa alkali.

 

II. Melemo ea mantlha

Ts'ebetso

Lesotho la eona le leholo le le leng le etsa hore e betele tšebetso e thata e etsang hore ho be thata, ho taka le ho inama, 'me o boemong).

Litlhahlobo tsa bophahamo ba honoe le ho taka ho ntlafatsa bohare ba me lihlapi le litlamorao tsa mokhabiso.

Thepa e sebetsang

Moetlo oa motlakase o motle oa motlakase le o futhumetseng oa 55% -61% (International Copper Tekanyetso ea koporo e kopantsoeng le silevera), ea bobeli ke silevera le koporo.

E ke ke ea ba mocheso {}}}.

 

III. Likopo

Mokhabiso oa kaho ea boqapi: Cundall Wallels e tsamaeang ka matla

Lihlahisoa tsa elektroniki le li-elektroniki: Subsite, libese le lihokela tse feto-fetohang, li sebelisa boitšoaro ba bona bo phahameng.

Chelete ea indasteri: Litulo tsa lik'hemik'hale, hlobo le ze e-}}}}

Lipalangoang: likarolo tsa ho phuthoa tsa Battery Heat ea likoloi tse ncha bakeng sa likoloi tse ncha tsa matla, ho fokotsa boima ba koloi.

 

IV. Ho bapisoa le lisebelisoa tse ling tsa aluminium

1060 vs {{{{{{. 6061: 1060 ke aluminium e hloekileng, e nang le matla a tlase empa matla a tlase; 6061 ke aluminium- magnesius {5}: 7075 e ka matla haholo ho feta kalafo ea zint. "

Letlapa la aluminium, ka lebaka la bohloeki bo phahameng, ho sebetsoa ka katleho ea eona, ho ba litšenyehelo tsa bohlokoa, e se e le khetho ea bohlokoa e le lisebelisoa tsa motheo tsa indasteri.

 

 

I. Ho sebelisa melemo ea ts'ebetso

Mekhoa e Kholisang e Khahlano e Khabisitsoeng ka ho Fetisisa

E tšehetsa ho palama khase, hydrogen ea hydrogen, le ho ikopanya le welding, e etsa e loketse haholo

Arcon Arc Welding (Tig / MIG) e fokotsa litlamorao tsa oxidation, e bakang lintlha tse phahameng -.

Litšobotsi tsa Weld

E boloka mafu a matle ka mor'a ho sokolla, empa matla a eona a tlase (matla a joalo a tlase (matla a mangata a na le 66% -78% ea motsoali).

Filimi ea Aluminium Oxide e ka tlosoa ka mokhoa oa ho hloekisa kapa oa lik'hemik'hale, ho ntlafatsa litekanyetso tsa katleho.

 

II. Liteko le Meroalo le Litlhoka "

Litaba tsa Oxidation

Films kapa Al₂o₃) Fokotsa libaka tse hloekileng tsa aluminum, li hloka liphofu tsa dc Reverse li-pecver kapa tse phahameng--

Ho khothaletsoa terata e nang le silizon le magnesium (joalo ka 4043) ho khothalletsoa ho ntlafatsa phofo ea letsopa.

Sepolota sa Monyako

Ho fana ka mocheso o feteletseng ho ka lebisa habonolo ho pherekano ea lijo-thollo kapa deformation. Ho putlama Arcon Arc Welding kapa bo-'mè ba handing (μfsw) bo khothalletsoa taolo ea mocheso.

 

III. Litlhahiso tse tloaelehileng tsa "mekhahlelo ea" Welding "

Bakeng sa lipolanete tse tšesaane (<5mm): Pulsed tungsten inert gas arc welding is preferred, as it offers a wide parameter window and minimizes deformation.

Bakeng sa lipolanete tse teteaneng (5-50mmm): Metal esele ea tšepe e arc welding (mig) kapa ho tlosa terene e kholo e fana ka kotsi ea ho pefo.

Ka kakaretso, Aluminium plate ho welding e hloka ho lekana pakeng tsa ts'ebetso ea ts'ebetso le taolo ea bofokoli, e etsang hore e loketse likarolo tsa sebopeho ka litlhoko tse tlase tsa matla.